IMPORTANT SAFETY INSTRUCTIONS
WARNING
• Be careful when using the product on hardwood,
coated floor, brick floor and high quality floor etc.
It can cause discoloration or deformation depending on the
floor material.
• Please try your vacuum cleaner with steam function
on a little floor area beforehand, in order to chek there
is no awkward reaction.
• Do not stay in one location or use it on the same
location repeatedly.
It can cause discoloration or deformation by the hot heat of
the steam.
• Do not open the water hole cap of the nozzle or supply
water when the product is being used or when the
power is turned on.
It can cause burns or overspill the hot water by hot heat of
the steam.
• Never flip or tilt the steam nozzle when the power is
turned on, being used for cleaning or right after finishing
cleaning.
It can cause burns from the spraying of steam.
• When cleaning the exterior of the nozzle, always unplug
the power and do not use volatile substance.
It can cause electric shock and exterior damage.
• Do not touch the bottom surface of the steam nozzle
directly with you hands or feet.
It can cause burns.
• Do not pour in synthetic detergent, chemical
substance and other substances instead of water.
It can cause product damage or explosion.
• Please use 50% demineralized water and 50% tap
water. Do not use only demineralized water, because it
is too acid for home appliances. In regions more
calcareous, vous can use 2/3 demineralized water and
1/3 tap water.
• Do not clean the exterior and bottom surface of the
steam nozzle with water or detergent
It can cause product damage and electric shock.
• Unlike the hose of the existing cleaner, high current
flows through the hose, this can cause fire and electric
shock.
• Make sure the steam is not applied directly to human or
animal.
It can cause a direct burn.
• Make sure that the children, the elderly or people who
does not know how to operate the cleaner, do not use
the product.
It can cause burns.
• Do not directly touch the surface of the nozzle when
cleaning or when the nozzle is heated.
It can cause burns.
• Do not vacuum water or clean with water because the
steaming hose is internally installed on the electric
connection part.
Periodically check whether there are any problems with the
pipe and if there are any damaged parts, stop using the
product and contact the service center.
• When attaching or replacing the microfiber cloth, turn
off the power and use the cloth board to attach/detach
the cloth.
If you replace the microfiber cloth with the power on, it can
cause damage on the floor or cause a fire.
• When the circuit breaker operated when the power is
turned on or when using the steam cleaner, immediately
stop using the product and contact the AS center.
It can cause electric shock may occur.
5