Heating With Electricity - Alde 3010 413 Instructions D'utilisation Et De Montage

6.

Heating with electricity

Do as follows to active heating with electricity. The greater the power, the better the heating performance.
In choosing between electricity and gas, electricity is given priority.
22 C
3 kw
On
Off
MENU
7. Heating with gas
Do as follows to activate heating with gas. If both electricity and gas are selected, electricity is given priority.
22 C
3 kw
On Off
MENU
8. Unlocking the tool menu
It is possible to go from the setting menu to the tool menu. Under the tool menu you can access the other functions
of the control panel, described in section 9.
1. The control panel in setting
menu. Press the unlock symbol.
22 C
3 kw
On Off
MENU
1. Start and step between the
various power steps (Off, 1kW,
2kW or 3kW) with the + but-
ton or – button. The set value
is displayed on the screen.
Certain boilers only have 1kW
and 2kW.
2. The settings are ready and the
boiler is working at set tem-
perature.
1. Start the gas operation by
pressing On (On is activated).
2. The settings are ready and the
boiler is working at set tem-
perature.
2. From the unlock menu, press
the tool symbol, and then OK
or MENU to unlock the tool
menu.
Lock
OK
MENU
3. To switch off the electrical oper-
ation, step with the
– button to Off.
3. In order to switch off gas op-
eration, press Off.
3. The control panel in setting
menu with unlocked tool menu.
In order to get to the tool menu,
press the symbol.
22 C
3 kw
On Off
MENU
13