Publicité
Les langues disponibles
Les langues disponibles
WIRING SCHEMATIC continued....
INSTALLATION
With a #2 Philips screwdriver
1
remove and retain the 4 screws and
remove the back plate.
Drill through the back plate as
4
required to fasten the back plate to
the junction box on the wall.
Fasten the fixture back together
6
with the rationed 4 screws to
complete installation
2
©2023 EiKO Global, LLC. World Headquarters: 18000 W. 105
PHOTOCELL CONNECTED
2
5
Complete connections as per wiring diagram. Set power output and CCT as desired.
EiKO Canada, LLC: 7900 Goreway Dr. Unit 8, Brampton ON Canada L6T 5W6 (P) 1.888.741.2673 (F) 1.888.705.1335
Use a large Philips or flat head to
remove the 1/2" threaded KO plug
from the back plate.
Street, 3
Floor, Olathe, KS 66061 (P) 1.800.852.2217 (F) 1.800.492.8975
th
rd
PHOTOCELL DISCONNECTED
Peel and stick the octagon foam
3
pad to the back plate. Ensure that
the screw holes are aligned.
eiko.com
Rev. 03/27/23
Publicité
