Publicité
Les langues disponibles
Les langues disponibles
Installation
1
Preparing for installation
CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□
Shut off the water supply.
□
Before installation, remove the quick connector (E)
from the free end of the hose by unscrewing it in a
counterclockwise direction.
□
Unscrew the nut (D), and remove the
washers (B & C).
NOTE: If installing the faucet assembly (A) without the
escutcheon, begin with step 2. If installing the faucet
assembly (A) with the escutcheon, begin with step 3.
A
B
C
D
E
2
Installing the faucet assembly
NOTE: This step is for no escutcheon installation (optional).
If the escutcheon will be used, install the faucet assembly
as described in step 3.
□
Insert the faucet body through the hole in the
sink.
4
Publicité
