cosi SCOOP DOT Mode D'emploi page 6

6. Removing the Gas Cartridge
•
Check if the gas cartridge is completely empty before changing it (shake to hear the liquid).
•
Make sure the appliance is not operational by turning the control knob fully clockwise (OFF);
check if the appliance has been fully extinguished and has cooled down completely, before
removing the gas cartridge.
•
Always check the sealing ring before connecting a new gas cartridge to the appliance.
•
Only change gas cartridges outdoors and away from combustible objects, naked flames and
any other ignition sources, pets and people.
•
Remove the metal top before removing the gas cartridge.
•
Dispose of in accordance with the instructions printed on the gas cartridge.
•
Unscrew the cartridge cover clockwise; remove the empty gas cartridge by hand.
•
Turn the cartridge cover anti-clockwise to lock it again.
7. What to do if something goes wrong?
Of course, we do everything we can to manufacture safe products. Therefore, always follow all
instructions and requirements in this user manual.
Extinguishing instructions for Cosiscoop gas lanterns
If something goes wrong, it is important to stop the gas supply as soon as possible. Immediately
turn the control button 'OFF' to stop the gas supply. In most cases, the flame will extinguish
immediately. If there is a leak in the gas cartridge that prevents the flame from extinguishing, the
flame can be extinguished with a fire blanket or a powder extinguisher. The fire blanket will allow
you to extinguish the fire at an early stage. In addition, a powder extinguisher is suitable for
extinguishing fires caused by propane/butane gas. NEVER extinguish with any other type of fire
extinguisher or water.
8. Storage
•
Once fully cooled, and if the gas cartridge is completely empty, disconnect the appliance
from the gas cartridge and store in a cool, dry and well-ventilated place. CAUTION: If the gas
cartridge still contains gas, DO NOT disconnect from the appliance.
•
Make sure you store your full gas cartridges in a safe, ventilated area away from ignition sources.
9. Maintenance
•
DO NOT modify the appliance.
•
If you suspect a gas leak or malfunction, stop using immediately and turn off the control
valve. Have the appliance tested by a qualified person; please contact your supplying retailer
for assistance.
•
If the appliance does not turn on or the effectiveness decreases, contact the seller.
EN
6