Safety - Honeywell CS10XE Manuel Du Propriétaire

READ AND SAVE THESE INSTRUCTIONS:
When using electrical appliances, basic safety precautions should always be followed:
• Your cooler runs on 120 Volt AC, 60 Hz current. Check the
household voltage to ensure it matches the appliance's rate
specification.
• Before operating the product remove it from its packaging
and check that it is in good condition.
• DO NOT operate any product with a damaged cord or plug.
We recommend not using an extension cord with this
appliance.
• DO NOT run power cord under carpeting, or cover it with
rugs or runners. Keep the cord away from areas where it
may be tripped over.
• Always unplug the product before refilling the water tank.
• Always unplug the appliance from the power source before
cleaning, servicing or relocating the unit.
• Remove the power cord from the electrical receptacle by
grasping and pulling on the power cord plug-end only, never
pull the cord.
• DO NOT use the product in areas where gasoline, paint or
other flammable goods and objects are stored.
• When using the COOL setting, check the water tank to
ensure that it is full. Operation of this cooler on the COOL
setting with an empty tank may result in damage to the
water pump.
• WARNING: To reduce the risk of fire or electric shock, do
not use this appliance with any solid state speed control
device.

SAFETY

120V AC 60Hz
SHOCK HAZARD
WATER LEVEL INDICATOR
5