Filling With Water - Honeywell CS10XE Manuel Du Propriétaire

USE & OPERATION

FILLING WITH WATER

Open the Water Fill Tray located at the back of the unit. The
water tank of the unit holds up to 2.6 Gallons of water.
The Water Level display window is located on the front of the
unit. Refill the water tank when water level is low. Do not fill
water above the Max water level mark. Check water level in
the tank before running the COOL function. Please be sure
water in the tank is always above the minimum water level
Water Fill Tray
mark. Running the unit with inadequate water may cause pump
failure. If ice is available you may add ice in the top compartment
Water Level Indicator
to enhance the cooling performance.
CAUTION
Unplug from power when refilling.
13