Publicité
Les langues disponibles
Les langues disponibles
Functional Description
6.
Functional Description
Fig.
To set the extraction capacity:
After switching on, operation continues with the last set extraction capacity.
To reset the filter operating time:
To reset to factory settings:
To connect to a soldering station or a rework system:
The solder fume extraction EASY ARM 1 can be connected to the following Ersa soldering equipment:
i-CON 1 C and i-CON 2 C, i-CON VARIO 2 and i-CON VARIO 4, or an Ersa rework system.
6.1
Standby Mode
The extraction device enters standby once the last of the connected tools has switched
to standby mode.
No settings can be made on the extraction device display as long as it is in standby.
24
Unfold the front cover before reading further. The mentioned pictures
can be found on these pages.
All device settings are made via the two push buttons on the display. The
upper push button is referred to as button
as button
❷
as they are not lit.
The following table describes the possible settings and how they are
made:
Description
By pressing and holding down button ❶, the extraction capacity is continuously increased.
By pressing and holding down button ❷, the extraction capacity is continuously decreased.
The extraction capacity can be increased/decreased. Both buttons are active.
Maximum extraction capacity is reached. Beep & button ❶ inactive. Button ❷ is active.
Minimum extraction capacity reached. Beep & button ❷ inactive. Button ❶ is active.
Press and hold down button
Switch on the device. Wait 10 seconds/10 beeps.
Release both buttons at the same time.
Press and hold down button
Switch on the device. Wait 3 seconds/3 beeps.
Release both buttons at the same time.
Connect the interface cable (3CA10-2003) to the interface connector A or B of the soldering station or
of the w system , and to the remote port 1 or 2 of the extraction device.
3BA00216 • 2023-02-17 • Rev. 3
. The buttons are active when they are lit and inactive as long
and button
.
❶
❷
and button
.
❶
❷
and the lower push button
❶
Ersa EASY ARM 1
Publicité
