Kurtz Ersa EASY ARM 1 Notice D'utilisation page 23

Commissioning
5. Commissioning
5.1 Scope of Delivery
Please check the package contents for completeness and integrity. If any components are
damaged or incomplete please immediately contact your supplier.
The scope of delivery includes:
5.2 Before Commissioning
Ersa EASY ARM 1
• Solder fume extraction EASY ARM 1
• Mains cable
• Pre-filter & combination filter
• These operating instructions.
■
Take the solder fume extraction device out of the packaging and remove
any protective film completely.
■
Carry the extraction device using the handles and place it vertical and
with air intake at the top at the desired location.
■
Connect the device with the power cord to a suitable power supply.
■
Put the combination filter and pre-filter into the device (see Chapter 8).
■
Connect a suitable extraction arm to the extraction nozzle.
■
Apply a suitable nozzle to the extraction arm.
■
Switch on the device.
3BA00216 • 2023-02-17 • Rev. 3
23