Kurtz Ersa EASY ARM 1 Notice D'utilisation page 21

For Your Safety
3.2 Additional Safety Instructions
Ersa EASY ARM 1
Do not operate the device nearby water or in rooms with excessive humidity.
Never spill liquids on the device; do not insert any foreign object into the
product; you might suffer an electric shock or cause equipment damage.
The device may only be operated with the specified supply voltage.
The device must be kept away from any heat sources and is not approved for
use in hazardous areas! The device must only be used in enclosed spaces.
The dusts generated during soldering are harmful. Therefore wear appro-
priate protective clothing for all work done with opened device, e.g. filter
change, at least breathing mask and gloves.
The filters used in the device must not be cleaned, but must be disposed
of after use.
The system owner is responsible for compliance with the statutory emission
limit values in the workplace.
The solder fume extraction device must not be used for extracting combus-
tible gases.
3BA00216 • 2023-02-17 • Rev. 3
21