Philips SCD485 Manuel D'utilisation page 6

2 Introduction
Congratulations on your purchase and welcome
to Philips AVENT! To fully benefit from the
support that Philips AVENT offers, register your
product at www.philips.com/AVENT.
Philips AVENT is dedicated to producing
caring and reliable products that give parents
the reassurance they need when looking after
the health and safety of their baby. This Philips
AVENT baby monitor provides the essential
reassurance of an ultra clear sound connection
to your baby, so you will always know when
your baby needs you. Adjustable channel
settings, intuitive sound activated lights, sound
and light indicators for link, range and low
battery ensure you are always connected.
SCD486 contains two battery-operated parent
units so you can easily monitor your baby from
multiple places in and around your home.
EN
8
3 Overview
Parent unit (Fig. 1)
Press to turn the parent unit on or off
a
b link
• In green: The parent unit is linked to
the baby unit.
• In red flashing: The parent unit is
searching for the baby unit.
c Sound level lights
• Indicate the level of sound in your
baby's room
d Speaker
e Connector for the supplied AC/DC
adapter
f
• In green: The parent unit is turned on.
• In red flashing: The batteries are low in
power.
volume
g
• Turn to change the volume up/down
• Turn down fully to mute the volume
h Lid of battery compartment
i Three 1.5 V R6 AA batteries (not
included)
j 1 channel 2
• Switch to Channel 1 or Channel 2
k Battery compartment
l AC/DC adapter
• Input: 100-240V AC
• Output: 6.0V DC, 300 mA
• Model number: SSW-2350US