Far Group Startools GG 950 Mode D'emploi page 32

Be sure the total load is within generator rated output otherwise generator da-
mage will occure.
OPERATION OF THE POWER GENERATING UNIT
Alternative current (AC)
1- Wind the power lead 2 or 3 turns around handle.
2- Start the engine.
3- Plug into AC socket.
4- Press into the AC protector and turn on teh electric apparatus
N.B : Press to reset the AC protector.
1: «ON» 2: «OFF»
-Be sure all electric apparatuses including the lines and plug connection are in
good condition before connection to the generator.
-Be sure electric apparatus is turn off before plugging it in.
-Be sure the total load is within generator rated output.
-Be sure the socket load current is wthin socket rated current.
STOP OF THE POWER GENERATING UNIT
N.B :
Turn off the electric apparatus.
1- Disconnect the electric apparatus.
2- Turn the engine switch to the OFF»
3- Turn the fuel cock lever to «ARRÊT»
Reduce the load to the specified generator rated output if the AC protector turns
off. If it turns off again, consult your FARGROUP dealer.
818015-Manuel-A 32
«position
© FAR GROUP EUROPE
EN
24/06/08 10:17:54