Publicité
Les langues disponibles
Les langues disponibles
Problem
Possible cause
Several appliances
are connected to one
outlet.
I see some
Some small spots can
peeling off spots
appear inside the pan
inside my Airfryer.
of the Airfryer due to
the incidental touching
or scratching of the
coating (e.g. during
cleaning with harsh
cleaning tools and/
or while inserting the
basket).
White smoke
You are cooking fatty
comes out of the
ingredients.
appliance.
The pan still contains
greasy residues from
previous use.
Breading or coating did
not adhere properly to
the food.
Marinade, liquid
or meat juices are
splattering in the
rendered fat or grease.
My display shows
The device is broken/
"E1".
defect.
Your Airfryer might be
stored in a place where
it is too cold.
Solution
The Airfryer has a high wattage. Try a
different outlet and check the fuses.
You can prevent damage by lowering
the basket into the pan properly. If you
insert the basket at an angle, its side
may knock against the wall of the pan,
causing small pieces of coating to chip
off. If this occurs, please be informed
that this is not harmful as all materials
used are food-safe.
Carefully pour off any excess oil or
fat from the pan and then continue
cooking.
White smoke is caused by greasy
residues heating up in the pan.
Always clean the pan and the basket
thoroughly after every use.
Tiny pieces of airborne breading
can cause white smoke. Firmly press
breading or coating to food to ensure
it sticks.
Pat food dry before placing it in the
basket.
Call the Philips service hot line or
contact the Consumer Care Center in
your country.
If your device was stored at a low
ambient temperature, let it warm up
to room temperature for at least 15
minutes before you plug it in again. If
your display still shows "E1", call the
Philips service hot line or contact the
Consumer Care Center in your country.
ENGLISH
17
Publicité
