Powermate PLS20825 Manuel De L'opérateur page 9

Assembly
(Continued)
• Save all instructions
Step 2: Attach Support Leg to the Tow Bar
1. Attach the support leg (#6) to the tow bar (#1)
secure using a hex bolt M10x95 (#5), flat washer
Ø10 (#3), Nylon lock nut M10 (#2) and lock pin A
(#4). (See fig. 3)
Step 3: Attach Tow Bar to the Hydraulic Tank
1. Attach the tow bar (#1) to the hydraulic tank and
secure using two hex bolts M12x100 (#4), flat
washer Ø12 (#3) and nylon lock nut M12 (#2).
(See fig. 4)
Step 4: Attach the Beam Assembly
1. Attach the beam assembly (#1) to the hydraulic tank
and secure using the hinge pin
(#2 and R-Pin Ø3 #3). (See fig. 5)
2. Rotate beam to horizontal position and secure with
front lock pin.
Questions? Call Toll Free at 1-800-737-2112
Figure 3
Figure 4
Figure 5
ENG - 9
Copyright © 2018 MAT Engine Technologies, LLC
1
2
3 4
5
6
1
2
3
1
2
3
4