Powermate PLS20825 Manuel De L'opérateur page 15

Operation Illustrations
• Save all instructions
FOR HORIZONTAL USE:
1. Insure front pin is completely engaged to secure
front of splitter beam. (See fig. 12)
FOR VERTICAL USE:
1. Pull front pin to release beam.
2. Rotate beam to vertical position.
3. Pull rear beam lock pin and rotate to 9:00 o'clock
position to secure beam. (See fig. 13)
FOR VEHICLE TOWING:
1. Press handle down and lock tightly.
2. Hook safety chain to towing vehcle.
3. Rotate front leg up and install the lock pin.
(See fig. 14)
Questions? Call Toll Free at 1-800-737-2112
Beam Lock Pin
ENG - 15
Copyright © 2018 MAT Engine Technologies, LLC
1
Figure 12
Figure 13
1
3
2
Figure 14