Behringer ULTRA-DI DI20 Mode D'emploi page 2

2
ULTRA-DI DI20
2. Controls
Fig. 2.1: Controls of the DI20
CH. 1 IN input is used to connect unbalanced as well as
(1)
balanced signal sources to channel 1.
CH.1 OUT is the balanced output at mic level for channel 1.
(2)
CH.2 IN input is used to connect unbalanced as well as
(3)
balanced signal sources to channel 2. In Link mode (see (6)) this
connector functions as output and sends the signal
directly from channel 1.
CH. 2 OUT is the balanced output at mic level for channel 2.
(4)
In Link Mode (see (6)) this connector sends the signal directly
from channel 1.