operating Instructions, tips
CLEAN THE LINT FILTER
•
After each load.
•
To shorten drying time.
•
To operate more energy efficiently.
Do not operate your dryer without the lint filter in place.
LOAD THE DRYER PROPERLY
•
Place only one washload in your dryer at a time.
•
In mixed loads, heavy and lightweight fabrics will dry differently. This may result in lightweight fabrics
being dry while heavy fabrics remain damp at the end of a drying cycle.
•
Add one or more additional similar items to your dryer when you are drying only one or two items.
This improves the tumbling action and drying efficiency.
•
Overloading restricts tumbling action, resulting in uneven drying as well as excessive wrinkling of some
fabrics.
GETTING STARTED
1. Load your dryer loosely – DO NOT overload.
2. Close the door.
3. Select the appropriate cycle and options for the load (see pages 20, 21).
4. Press the Start/Pause button.
5. The dryer indicator light will illuminate.
6. The estimated cycle time will appear in the display.
The time may fluctuate as humidity levels fluctuate in the dryer.
•
When the cycle is complete, the Door Lock light will go out and "End" will appear in the display.
•
Pressing Power cancels the cycle and stops your dryer.
•
The Drying, Cooling, and Done indicator lights will illuminate during those portions of the cycle.
Do not place anything on top of your dryer while it is running.
WARNING
26_ operating Instructions, tips
DV231AEW-03064B-02_EN.indd Sec5:26
DV231AEW-03064B-02_EN.indd Sec5:26
2012-10-11
2012-10-11
5:44:18
5:44:18