Publicité
Les langues disponibles
Les langues disponibles
Residual heat indication
After the switching off of a heating zone or the complete stop of the hob, the heating zones are
still hot. This is indicated by displaying [ H ] symbol.
The symbol [ H ] disappears when the heating zones may be touched safely.
As long as the residual heat indicators are on, don't touch the heating zones and don't put any
heat sensitive object on them. There are risks of burn and fire.
Booster function
The Booster function [ P ] and the Double Booster [
heating zone.
If this function is activated the heating zones work for 10 minutes with an ultra high power.
Booster is needed for example to heat up rapidly big quantities of water, like rice, pasta or
noodles.
•
Start up / Stop the booster function:
Action
Start up the Booster
Stop the Booster
•
Start up / Stop the double booster function:
Action
Start up the Booster
Start up the Double Booster
Stop the Double Booster
•
Power management:
The table is divided in 2 separate sets of heating zones, each set having a maximum power.
If the selected heating levels for both zones exceed the maximum available amount of power, the
power management function is automatically reducing the power from one of these zones. The
display of this zone is first blinking; the level is then automatically reduced to the highest suitable
position.
Control panel
Slide to the end of the "SLIDER"
Or press directly on the end of
the "SLIDER"
Slide on the "SLIDER"
Control panel
Slide to the end of the "SLIDER"
Or press directly on the end of
the "SLIDER"
Press 2 times the end of the "SLIDER" [
Slide on the "SLIDER"
A
B
29
] add a boost of power to the selected
Display
[ P ]
[ 9 ] to [ 0 ]
Display
[ P ]
[ 0 ] to [ P ]
B
A
and P ]
Publicité
