Kygo A4/300 Mode D'emploi page 9

E N G L I S H
Pairing the headphone with Bluetooth® devices
1. Make the headphone- enter into the pairing mode (please refer to
above section)
2. Place the Bluetooth® headphone and Bluetooth® device (phone,
tablet, music device) within 1 meter from each other.
3. Activate the Bluetooth® function on your Bluetooth® device. Please
refer to the manufacturer's manual for instructions on enabling
Bluetooth® on your device. After searched, select "KYGO A4/300" in
the device list on the Bluetooth® device.
4. If you are prompted for a password, enter the "0000" and press
"connect" (only some Bluetooth® devices will ask for a password).
16
E N G L I S H
5. When the connection is successful, a sound emited from headphone
and BLUE LED will quickly flash a few times indicating the pairing is
successful.
Please note the pairing process on the headphone will last for around 3
minutes. If no devices are paired within around 3 minutes, the headphone
will automatically return to standby mode. If the pairing is unsuccessful,
turn off the headphone first and then re-pair again following the above
steps.
17