Publicité
Les langues disponibles
Les langues disponibles
English
4. Important electrical information
The tool plug must fit into the socket.
4.1
The plug may not be modified in any
form. Do not use adapter plugs
together with protective-earthed
tools.
Unmodified plugs and suitable sockets
reduce the risk of an electric shock.
Avoid physical contact with earthed
4.2
surfaces such as pipes, heating ele-
ments, stoves and refrigerators. The
risk through electric shock increases if
your body is earthed.
Keep the equipment away from rain
4.3
and moisture. The risk of an electric
shock increases if water penetrates
electrical equipment.
Do not misuse the mains lead by car-
4.4
rying the tool by the lead, hanging it
from the lead or by pulling on the lead
to remove the plug. Keep the lead
away from heat, oil, sharp edges or
moving tool parts. Damaged or twisted
leads increase the risk of an electric
shock.
If you work outdoors, use only exten-
4.5
sion leads that are approved for out-
door use. The use of an extension lead
that is suitable for outdoors reduces the
risk of an electric shock.
5. Before the first use
Remove the machine and all accessories
from the package. Keep the packaging
materials out of the reach of small children.
There is a danger of suffocation!
6. Contents of packing
1× Electrical spray gun
4× nozzles: 2.5 mm (assembled on
machine), 1.5 mm/2.0 mm/3.0 mm
1× Cleaning needle
1× Viscosity measuring cup
1× Cleaning brush
3× Check valve for air hose
1× Air hose
1× Shoulder strap
1× Seal ring for paint
10× Paper filter with Batavia logo
1× Instruction manual
10
7. Intended use
The Maxxspray paint spray gun is suitable
for applying paint, lacquers, primer, sealer,
stain and interior wall paint.
• Any other usage of or modification to the
appliance is deemed to be improper and
carries a significant risk of accidents.
• The use of easily flammable, combus-
tible paints, lacquers or thinners is
strictly prohibited.
• The intended use also includes an opera-
tion following the operating instructions.
• Any use beyond these parameters can
lead to serious risks and is regarded as
use that is contrary to the intended
purpose.
• The machine is not intended for
commer cial use.
8. Assembly
Aligning the suction tube
8.1
(See Fig. C, G).
• If you are going to be spraying in a down-
ward direction, the angled end of the
suction tube (19) should be pointing
toward the front of the gun.
• If you are going to be spraying in an
upward direction, the angled end of the
suction tube (19) should be pointing
toward the rear of the gun.
• By pointing the suction tube in the proper
direction, you will not have to refill the
container as often.
Attaching spray unit to spray gun
8.2
handle
(See Fig. A, B).
• Align the marking line on the spray unit
with the icon of unlock, then rotate the
spray gun handle clockwise until stop.
• Rotate the quick release lock (9) and
snap onto the hook on the edge of canis-
ter lid.
Attaching the air hose
8.3
• Insert one end of the air hose into the
hose connector of the back of the
sprayer. A slight twisting action when
inserting the hose will help insure a snug
fit.
Publicité
