Correct Disposal Of The Product - Party Light & Sound PARTY-8COMBI Manuel D'utilisation

USING THE MIC INPUT
Insert a standard 6.5mm connector of a wired microphone (not included) into the microphone input jack .
Use the mic volume knob to adjust the volume.
WARNING: It is recommended to turn the speaker's microphone echo knob to the left all the way. To prevent
any feedback or loud pops when connecting the microphone.
MOUNTING THE SPEAKER
The speaker can be mounted on any conventional stand mount with a maximum shaft diameter of 1.45".
Unscrew the butterfly screw, insert the rod of the stand into the shaft hole and tighten until secure.
Make sure that the stand is capable of supporting up to 6.8kg.
Specifications
Input voltage
Built-in battery
Play time at 100% volume with LEDs on
Play time at 80% volume with LEDs off
Signal-to-noise ratio
Frequency response
BT frequency
Bluetooth version
Max. RF transmission power
Dimensions
Weight

Correct disposal of the product

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To
prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources. To return your used device, please use the return and collection
systems or contact the retailer where the product was purchased. They can take this product for environmental safe
recycling.
4
5V�� 1A via supplied USB charging lead
Lithium 3.7V�� 2000mAh
2 hours
4 hours
>70dB
80Hz - 18kHz
2402-2480MHz
5.0
0.998dBm
235 x 210 x 385mm
2.4kg
EN