Edid Settings - Marmitek Split 418 UHD Guide Utilisateur

2. Use an HDMI cable to connect the screens (TVs or projectors) to HDMI
ports marked "HDMI output".
3. Connect the power adapter to the "DC 5V" and insert the plug into the
socket.

5. EDID SETTINGS

EDID stands for Extended Display Identification Data and is used for
communication between HDMI sources and screens, enabling you to
determine the supported display resolutions and audio formats. The HDMI
source requests this information from the screen and determines the best
resolution or audio format. When using multiple screens (TVs or projectors),
the best resolution and audio format that is supported by all connected
screens is determined.
This may cause problems in some situations, for example, when one of the
connected sources or screens does not fully support EDID. Using switches
at the front, you can manually enter the required video resolution and audio
format. See Appendix 1 on page 39 for an overview of the associated
settings.
Tip: In standard situations, always use the automatic setting, which will
result in sound and image on all connected screens. With manual settings,
no image or sound may be displayed on one or more screens if the
appropriate setting is not supported
Split 418 UHD™ 5