cecotec ProClean 3050 Manuel D'instructions page 15

3. BEFORE USE
1. Take the product out of its package. If the microwave has a protective film, tear it off before
starting operation. Check carefully if there is any damage, and if there is, immediately
notify the Technical Support Service.
2. The product must be placed on a flat, stable and dry place and kept away from corrosive
materials, heat and humidity, such as gas burners or water.
3. To ensure enough ventilation, minimum distances have to be kept:
- From the back part to the wall: 10 cm.
- From the side to the wall: 5 cm.
- Free distance from the top surface: 20 cm.
- From the microwave to the ground: 85 cm.
4. The product must be placed, at least, at 5 m from the TV, Radio or antenna.
5. The product must be placed in such way that the plug is accessible, and must ensure an
effective grounding in case of leakage in order to avoid electric shocks.
6. The microwave door must be closed in order to operate.
7. In case there is any manufacturing rests in the microwave cavity or on the heating
elements, leave the microwave open to ensure good ventilation. In such case, it is
recommended to heat a glass of water at high power for several times.
WARNING: Never remove the mica plate!
4. CONTROL PANEL
1. Low power
2. Defrost
3. Medium low power
4. Medium power
5. Medium high power
6. High power
01528_ProClean 3050_Manual_BM.indd 15
ENGLISH
PROCLEAN 3050 15
24/4/18 9:52