Publicité
Les langues disponibles
Les langues disponibles
ge and then remove door and place it on a soft pad to
hinge and then remove door and place it on a soft pad to
.
hinge. Then remove the adjustable feet from both
4.
Remove the bottom screw, hinge bracket and adjustable foot from the bottom of the appliance.
om hinge. Then remove the adjustable feet from both
Reverse Door
5.
Take the hinge pin out of the hinge bracket. Turn the bracket around and tighten the pin again.
5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
se Door
w and remove the bottom hinge pin, turn the bracket over and replace it.
se Door
w and remove the bottom hinge pin, turn the bracket over and replace it.
Unscrew
6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable
6.
Attach the screws, hinge bracket and adjustable foot to the opposite side of the bottom. Loosely
Unscrew
feet.
secure.
bracket fitting the bottom hinge pin. Replace both adjustable
bracket fitting the bottom hinge pin. Replace both adjustable
7. Place the door back on. Ensure the door is aligned horizontally and
vertically, so that the seals are closed on all sides before finally
tightening the top hinge.
7.
Carefully set the door back into place. Ensure the door is aligned horizontally and vertically so that
e door back on. Ensure the door is aligned horizontally and
the seals are closed on all sides before finally tightening the top hinge. Insert the hinge back and
y, so that the seals are closed on all sides before finally
ng the top hinge.
screw it to the top of the appliance.
e door back on. Ensure the door is aligned horizontally and
y, so that the seals are closed on all sides before finally
ng the top hinge.
8. Put the top cover and fix it with 2 screws on the back.
op cover and fix it with 2 screws on the back.
op cover and fix it with 2 screws on the back.
www.domo-elektro.be
9. Fix the thermostat knob.
7
7
Unscrew
Screw
Screw
screw
screw
screw
Screw
DO1070DV
37
Publicité
