Whispbar K948W Instructions De Montage page 8

EN
Fitting Kit
K948W
Fitment
Clamps directly to edge of roof under the
doors
Please check the front of this manual for
information relating specifically to your
vehicle.
Place crossbar on vehicle. Minimum
recommended spacing between the bars is
700mm (27 1/2") (unless otherwise stated).
It is important to put the clamps in the
correct position on the vehicle.
Letters refer to the part numbers stamped
on clamps.
Clamp Part Number:
A = B695
B = B696
C = B697
D = B698
Attach clamp to each leg. NOTE; clamps
may have labels showing their positions on
the vehicle (For example; "Front Right").
8