CASO DESIGN MX1000 Mode D'emploi page 29

12.5 Safety information
Warning
Personal and property damages can occur during commissioning of the device!
Observe the following safety notices to avoid such dangers:
► Packaging materials may not be used for playing. There is a danger of suffocation.
12.6 Delivery scope and transport inspection
As a rule, the blender MX1000 is delivered with the following components:
 Blender jug
 Spatula
► Examine the shipment for its completeness and for any visible damages.
► Immediately notify the carrier, the insurance and the supplier about any incomplete
shipment or damages as a result of inadequate packaging or due to transportation.
12.7 Unpacking
To unpack the device, proceed as follows:
 Remove the device out of the carton and remove the packaging material.
12.8 Disposal of the packaging
The packaging protects the device against damages during transit. The packaging
materials are selected in accordance with environmentally compatible and recycling-
related points of view and can therefore be recycled. Returning the packaging back to the
material loop saves raw materials and reduces the quantities of accumulated waste.
Take any packaging materials that are no longer required to "Green Dot" recycling
collection points for disposal.
► If possible, keep the original packaging for the device for the duration of the guarantee
period of the device, in order that the device can be re-packaged properly in the event
of a guarantee claim.
12.9 Setup location requirements:
In order to ensure the safe and trouble-free operation of the device, the setup location
must fulfil the following prerequisites:
 Place the device on a firm and even work surface.
 Do not use the device outdoors.

Choose the setup location in such a way that children cannot reach the device.
Caso Standmixer MX1000
 Blades
 Main machine
Please note
Please note
 Blade base
 Operating Instructions
 Blender lid  Top lid
29