MSI MAG B760 TOMAHAWK WIFI DDR4 Manuel D'utilisation page 31

M2_1~3: M.2 Slots (Key M)
Installing M.2 module into M2_1 slot
1. Loosen the screws of M.2 Shield Frozr heatsink.
2. Lift up the M.2 Shield Frozr heatsink and remove it.
3. Remove or exchange the screws according to your SSD length. Skip this step, if you
install 2280 SSD.
3 3
22110
⚠
Important
∙ Intel® RST only supports PCIe M.2 SSD with
UEFI ROM.
If your M.2 SSD equips its own heatsink, please
∙
M2_1
remove the M.2 plates or rubber cubes in the
M.2 slots before installing M.2 SSD. Do not
re-install the heatsinks supplied with your
M2_2
motherboard.
M2_3
2 2
1 1
29
1 1
3 3
2242
2260