Bosch GKS Professional 190 Notice Originale page 10

OBJ_BUCH-692-001.book Page 9 Thursday, July 10, 2008 2:45 PM
Use suitable detectors to determine if utility
lines are hidden in the work area or call the
local utility company for assistance. Contact
with electric lines can lead to fire and electric
shock. Damaging a gas line can lead to explo-
sion. Penetrating a water line causes property
damage or may cause an electric shock.
Do not operate the power tool stationary. It
is not designed for operation with a saw table.
Do not use high speed steel (HSS) saw
blades. Such saw blades can easily break.
Do not saw ferrous metals. Red hot chips can
ignite the dust extraction.
When working with the power tool, always
hold it firmly with both hands and provide
for a secure stance. The power tool is guided
more secure with both hands.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
Always wait until the power tool has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Do not use the power tool with a damaged
cord. Do not touch the damaged cord and
pull the plug from the outlet when the cord
is damaged while working. Damaged cords
increase the risk of an electric shock.
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
While reading the operating instructions, unfold
the graphics page for the tool and leave it open.
Intended Use
The machine is intended for lengthways and
crossways cutting of wood with straight cutting
lines as well as mitre cuts in wood while resting
firmly on the workpiece. With suitable saw
blades, thin-walled non-ferrous metals, e. g., pro-
files, can also be sawed.
Working ferrous metals is not permitted.
Bosch Power Tools
Product Features
The numbering of the product features refers to
the illustration of the power tool on the graphics
page.
1 On/Off switch
2 Lock-off button for On/Off switch
(3 601 E23 X../3 601 E23 0B./
3 601 E22 X..)
2 Lock-on button for On/Off switch
(3 601 E23 0C./3 601 E23 0K./
3 601 E23 0L./3 601 E22 0..)
3 Spindle lock button
4 Scale for miter angle
5 Wing bolt for parallel guide
6 Wing bolt for bevel-angle preselection
7 Cutting mark, 45°
8 Cutting mark, 0°
9 Parallel guide
10 Retracting blade guard
11 Base plate
12 Lever for retracting blade guard
13 Sawdust ejector(3 601 E23 ...)
14 Blade guard
15 Hex key
16 Clamping bolt with washer
17 Clamping flange
18 Saw blade*
19 Mounting flange
20 Saw spindle
21 Extraction adapter(3 601 E23 ...)*
22 Fastening screw for extraction adapter
(3 601 E23 ...)*
23 Auxiliary handle*
24 Screw for auxiliary handle*
25 Wing bolt for cutting-depth preselection
26 Wing bolt for bevel-angle preselection
27 Set of screw clamps*
*The accessories illustrated or described are not in-
cluded as standard delivery.
English | 9
1 609 929 N82 | (10.7.08)