Settings Menu Content
Picture Menu Content
Mode
Contrast
Brightness
Sharpness
Colour
Energy Saving
Backlight
Picture Zoom
Picture Shift
Vivid HDR
Advanced Settings
Dynamic Contrast
Colour Temp
White Point
Vivid Blue
Vivid Dimming
Noise Reduction
Vivid
Contour
Vivid Motion
Vivid Motion
Demo
Film Mode
Skin Tone
Colour Shift
Gamut Mapping
You can change the picture mode to suit your preference or requirements. Picture
mode can be set to one of these options: Cinema, Game(optional), Sports, Dynamic
and Natural.
Dolby Vision Modes: If Dolby Vision content is detected Dolby Vision Dark and Dolby Vision Bright picture
mode options will be available instead of Cinema and Natural modes.
Adjusts the light and dark values on the screen.
Adjusts the brightness values on the screen.
Sets the sharpness value for the objects displayed on the screen.
Sets the colour value, adjusting the colours.
For setting the Energy Saving to Custom, Minimum, Medium, Maximum, Auto,
Screen Off or Off.
Note: Available options may differ depending on the selected Mode.
This setting controls the backlight level. This option will be avai̇ lable if the Energy Saving
is set to Custom. Highlight and use Left/Right directional buttons to set.
Sets the desired image size format.
This option may be available depending on the Picture Zoom setting. Highlight and press
OK, then use directional buttons to shift the picture upwards or downwards.
Virtual HDR function that manipulates colour, saturation and dynamic contrast, basically
converts Standard Dynamic Range picture to High Dynamic Range picture. Set as On
to enable.
You can change the dynamic contrast ratio to desired value.
Sets the desired colour temperature value. Cool, Normal, Warm and Custom options
are available.
If the Colour Temp option is set as Custom, this setting will be available. Increase the
'warmth' or 'coolness' of the picture by pressing Left or Right buttons.
White colour enhancement function that makes white colour more cooler in order to
make more bright picture. Set as On to enable.
Low, Medium, High and Off options are available. While Vivid Dimming is active, it
will enhance contrast locally for each defined zone.
If the signal is weak and the picture is noisy, use the Noise Reduction setting to reduce
the amount of noise.
Low, Medium, High and Off options are available. While Vivid
will decrease the contour effects in low resolution contents and auto streaming services.
Press left/right buttons to set Vivid Motion to Low, Medium, High or Off. While Vivid
Motion is active, it will optimize the TV's video settings for motional images to acquire
a better quality and readability.
When Vivid Motion option is set to Low, Medium or High, this option will be available.
Press OK button to activate the demo mode. While demo mode is active, the screen will
be divided into two sections, one displaying the Vivid Motion activity, the other displaying
the normal settings for TV screen. Press OK button again to cancel.
Films are recorded at a different number of frames per second to normal television
programmes. Turn this feature on when you are watching films to see the fast motion
scenes clearly.
Skin tone can be changed between -5 and 5.
Adjust the desired colour tone.
You can use this option to set the range of colours displayed on your TV screen. When
set as On, colours are set according to the source signal. When set as Off, the TV's
maximum colour capacity is used by default (recommended option).
Note: This option may not be available depending on the TV model and its features.
English - 18 -
Contour
is active, it