Typical Applications; Product Warranty - Master -MITE HEAT GUN 10008 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Typical Applications

Your Master-Mite
provides a flow of heated air for a variety of
®
applications. Uses are as limitless as your own ingenuity.
• Bend and form plastics
• Cure epoxies
• Deburring plastics
• Defrost frozen coils
• Dry negatives and parts
• Heat solids and liquids
• Loosen nuts and bolts
• Remove floor tiles and putty
• Repair vinyl
• Shrink tubing and packaging
• Soften materials
NOTE: Users should independently evaluate the suitability of the product for their application.
Suggested Nozzles for Heat Shrinkables
Type Tubing
Polyester
Polyvinyl Chloride
Irradiated Polyvinyl Chloride
Irradiated Butyl
Irradiated Polyelefin
Polyfluorinated Ethylene Propylene
Polyvinylidene Fluoride
Irradiated Neoprene
Irradiated Silicone
* Registered trade name of Pennsalt.
** Registered trade name of General Electric.
*** Based on latest available information.

Product Warranty

Master Heat Tools are carefully
tested and inspected before being
shipped from the factory.
We warrant our products to be free
from defects in materials and work-
manship, under normal use and
service, for one year from date of
purchase. In the event of a defect
in materials or workmanship we will
either repair or replace, at our
option, without charge any part
which in our judgement shows evi-
dence of such defect.
Warranty does not apply to wear-
able items such as attachments or
heating elements, which require
www.masterappliance.com
Common or Trade
Designation
Shrink Temp. °F***
Mylar*
PVC; Vinyl
PVC; Vinyl
FEP
Kynar**
periodic replacement, nor does it
apply if the heat tool has been mis-
used, abused, tampered with or
altered.
At the end of the warranty period,
Master Appliance shall be under
no further obligation, expressed or
implied. Master Appliance
assumes no responsibility for, and
this warranty shall not cover, any
incidental or consequential dam-
ages from any defect in products
or their use.
This warranty gives you specific
rights. You may also have other
rights which may vary from state to
Will not blow delicate compo-
nents around the work area.
Approx.
Suggested
Heat Nozzle
175
Blue
250
Silver
250
Silver
250
Silver
275
Silver
300
Silver
350
Silver
350
Silver
350
Silver
If you have any ques-
tions regarding your
specific application or
use, feel free to call our
Sales Department at
262-633-7791.
state. Warranty information is
included within the Instruction
Manual for each product or may be
obtained by contacting Master's
Customer Service Department.
Master Appliance Corp.
2420 18th Street
Racine, Wisconsin 53403
U.S.A.
Phone 262-633-7791
800-558-9413 (USA)
Fax
262-633-9745
sales@masterappliance.com
www.masterappliance.com
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Master-mite heat gun 10009Master-mite heat gun 10010

Table des Matières