Ecomo - Lean Burn Control; Trim Angle Operation & Fuel Burn Rate - HONDA marine NMEA 2000 Mode D'emploi

Honda ECO mode (ECOmo – Lean Burn Control)
Honda's Lean Burn Control technology (ECOmo) provides for
further improvement of fuel consumption in cruising mode by
operation on a leaner air/fuel mixture.
The Honda Digital NMEA 2000® gauges include a unique ECO
light, where illumination of the Green LED informs the boat
operator that the engine has now entered the "Lean Burn Control
mode" therefore contributing to reduced running costs.
ENG DATA
3125
Eng
Speed
Illuminated green upon recep-
tion of the ECOmo signal.
Trim Angle Operation & Fuel Burn Rate.
Both Tachometer and Speedometer are capable of providing
engine fuel burn rate data. However, only the Tachometer (upon
selection of trim control button), will display the fuel burn rate &
trim pop up automatically.
The indication of trim appears on the LCD screen as a gradu-
ated bar graph. The trim and fuel burn rate pop up temporarily
displaces all previously selected data, except alarm displays.
The pop up will remain active as long as any change in trim is
detected within 5 seconds of the last change.
ECO
rpm
The Trim display is displayed in the form of a graduated bar
graph and numeric display 0% ~ 100%.
ENG DATA
Normal operation and display
3125
Eng
rpm
Spd
If at least 5° of change in
trim is detected, the trim
pop up is visible.
Fuel Rate Fuel Rate
6.2
6.2
l/h
20%
5 seconds elapsed since
last change in trim, normal
display resumes.
ENG DATA
3125
Eng
rpm
Spd
Example: Trim & Fuel Burn Rate Pop up Display.
Real time display while trim
change is detected.
Fuel Rate
100%
6.2
50%
l/h l/h
7