Publicité
Les langues disponibles
Les langues disponibles
BRAKE OPERATION ADJUSTMENT
1. Pull up on brake handle lever to slow the roller
2. Push down on the brake handle lever to lock the rear wheels, pull up on the brake
lever handle to release the lock
3. Brakes must be applied in the lock position when the seat is going to be used.
pre check the lock by pushing forward on the roller.
Brake adjustment should be carried out as follows:
Turn the adjusting screw anti-clockwise to increase the tension then lock the
adjustment locking nut clockwise whilst holding the adjuster screw stationary.
Brake adjustment reduced to allow light pressure may be ineffective on the brake
position.
MAINTENANCE
Over a period of time, the brake cables may stretch, and if no further adjustments
can be made, the cables should be replaced. Ask qualified technician for help when
replacing brake cables. The castors should be checked that they are secure each
time before using the roller. Also, check the brakes operate correctly and the
handles and hand knobs are secure. Should any part of the roller appear loose or
insecure discontinue use until it is inspected by an qualified technician. The
following shows the maintenance schedule:
Weekly
●Check brake for malfunction
●Check all wheels and castors for loose bolts and nuts and knobs.
Periodically
●Check hand grips for wear
●Check frame bolts are secure
●Check front and rear axle bolts are secure
●Check for wear or crack
6
Publicité
