Ensure Accurate Measurements; Content List; Controls And Indicators - Welch Allyn RPM-Scale100 Mode D'emploi

A-4 Introductory information

Ensure accurate measurements

To ensure the accuracy of measurements, follow the recommendations below when you
start a measurement.
• Place the scale on a flat, hard surface. If you put the scale on carpet, fit the
extension feet before taking the measurement. Placing the scale sensors directly on
carpet may affect the accuracy of the measurement.
• Always start a measurement at the same time on the same scale located on the
same flat surface.

Content list

The following items are in the device box:
• Remote Monitoring Scale
• (4) AAA alkaline batteries (1.5V each)
• (4) extension feet for use on carpet
• Directions for use

Controls and indicators

The Welch Allyn weight scale is simple to use.
CAUTION Avoid storing the device where there is risk of shock or
dropping.
CAUTION Avoid storing the device where you store chemicals.
CAUTION Avoid storing the device where there are corrosive gases.
CAUTION Avoid storing the device near infants or children.
CAUTION The device does not need to be calibrated in two years of
reliable service.
CAUTION Do not attempt to repair the unit yourself in the event of
malfunctions. Only have repairs carried out by authorized service centers.
CAUTION Manufacturer will make available on request circuit diagrams,
component parts lists, and the like.
CAUTION Wireless communications equipment, such as wireless home
network devices, mobile phones, cordless telephones and their base
stations, walkietalkies can affect this equipment and should be kept at least
a distance d=3,3m away from the equipment. Note: As indicated in Table 6
of IEC 60601-1-2:2007 for ME Equipment, a typical cell phone with a
maximum output power of 2 W yields d=3,3m at an IMMUNITY LEVEL of
3V/m).
CAUTION Do not use rechargeable batteries.
Welch Allyn Remote Monitoring Scale RPM-Scale100