Siemens S1 RKM 10014 Mode D'emploi page 33

6
18. 0 18. 0
start stop
"Manual" : The ventilation speed can be
modified to five different speeds using buttons
< >
and . The speed set is indicated on the
LCD with an arrow. Depending on the
ventilation speed selected, air performance
varies from 125 m
(level 5).
Press button "h/°C" once to change the
temperature. The temperature indication
flashes and a five-second period is given to set
the temperature using buttons
"Turbo" : Temperature regulation is
performed automatically when "turbo" is
selected. The appliance starts up at 100%
temperature control power and adapts to room
atmosphere conditions directly, without passing
through each of the levels. Depending on room
atmosphere conditions, the appliance operates
at between 100% and 50% maximum power
when set to "turbo".
"Silent" : Temperature regulation is
performed automatically when "silent" is
selected. The appliance starts up at 50%
temperature control power and adapts to room
atmosphere conditions directly, without passing
through each of the levels. When set to "silent",
the appliance works very silently at a power of
between 2.350 W and 1.950 W.
The appliance lowers the temperature and dries
the air in the room at the same time in order to
create ideal air conditions.
If the appliance turns itself off automatically via
thermostat, then it is necessary to wait until room
temperature rises 2°C before it comes back on
again.
Condensed water formed during air conditioning
evaporates automatically and is expelled
outdoors, together with hot air, through the hot-
air expulsion duct. In conditions of extreme
humidity, the appliance accumulates condensed
water in an internal tank. When the water in the
tank reaches a certain level, the appliance turns
itself off automatically and the red indicator light
flashes to indicate that the tank needs to be
emptied.
Water is removed via the drainage tube fixed
onto the back of the appliance at the bottom.
3 /h (level 1) to 295 m
<
and
3 /h
>
.
33