Krüger & Matz MOVE 10 Mode D'emploi page 27

Owner's manual
However, if there is an excessive increase in temperature or
overheating, depending on the factor that caused it: device's
performance may be significantly reduced, charging process
may be stopped, the device may turn off or display notification
about switching off for cooling. Function available only in
selected models. Important: if the device displays notification
about overheat, turn it off and do not turn it back on until
completely cooled down!
In case of overheat during charging:
1. Disconnect the charger from the device.
2. Close any running apps.
3. Wait for the device to cool down, and then begin charging
the device again.
If the part of the device where the USB port is placed overheats,
check for damage to the connected USB cable. Replace the
damaged USB cable with a new authorized cable.
The device may also overheat during operation when using
several battery consuming applications or functions. In case of
overheat during usage:
1. Close any running apps.
2. Disconnect any connectivity (Bluetooth, Wi-Fi, data transfer
etc.).
3. Lower the screen brightness settings.
4. Wait for the device to cool down before attempting to use it
again.
Safety precautions concerning operation environment
In order to maintain battery's longevity, and to avoid overheat,
follow basic precautions including provisions listed below:
1. Do not use / store the device in very hot or cold environments
nor expose to direct sunlight (e.g. on a car's dashboard when
using as a navigation).
27