Publicité
Les langues disponibles
Les langues disponibles
structure using the 2 screws A (Fig.8). Join
the lower chimney piece with the upper one
and fix it carefully using adhesive tape L
(Fig.9).
- Unscrew the 2 screws O, max 3 mm
(Fig.9). Insert the exhaust unit inside the
structure paying attention that the pre-
viously unscrewed screws O, hook into
the slots in the lower part as indicated in
(Fig.10). Drive in the 3 screws N (supplied)
and tighten the 2 screws O (Fig.10).
- Fix the air evacuation pipe H (not sup-
plied) onto the connection flange F as
X = C - (3-9/16"+A+d+B)
27"<d<32"
5
4
G
6
- 14 -
B
C
B
G
C
G
Publicité
