Publicité
Les langues disponibles
Les langues disponibles
Warning!
Laser/LED radiation in the non-visible spectrum possible!
If the degree of hazard of the laser/LED radiation is not known, on no account look into the open fiber ends.
The assigned degree of hazard is for the constructor/operator of the communication equipment to finally determine
and to indicate in a responsible manner (e.g. by affixing standards-compliant warning labels as per DIN EN /IEC
60825-1, applicable issue, by compliance with BGV B2 "Laserstrahlung" (laser radiation), applicable issue).
If the technical data should change in a way that affects the degree of hazard, the warnings must if necessary be
amended accordingly and work safety precautions must taken, see also e.g. DIN EN/IEC 60825-2, applicable issue.
Installation Accessories
1. Cable tie
2. Struts for fiber management structure
3. Securing screws
4. Installation instructions
Replacing the Gel End Cap
1. Remove sealing ring from end cap.
2. Detach the ground lead from the grounding
screw on the end cap.
6
Caution
mafm_0513
3. Place a cable tie around the installed cables and
secure.
mafm_0514
1
2
3
4
mafm_0515
Publicité
