en
Operating tips
After the appliance has been switched
■
on, it may take several hours until
the set temperature has been
reached. Do not put any food
in the appliance beforehand.
The fully automatic No Frost system
■
ensures that the freezer compartment
remains free of ice. Defrosting is not
required.
The sides of the housing are
■
sometimes heated slightly. This
prevents condensation in the area
of the door seal.
If the freezer compartment door
■
cannot be immediately re-opened after
it has been closed, wait until
the resulting low pressure has
equalised.
Setting
the temperature
Fig. 2
Freezer compartment
The temperature can be set from -16 °C
to -26 °C.
Keep pressing temperature setting
button 4 until the required freezer
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on display 2.
We recommend a factory setting of -
18 °C in the freezer compartment.
26
Alarm function
In the following cases an alarm may be
actuated.
Door alarm
The door alarm (continuous sound)
switches on if the appliance door is open
for longer than one minute. Close
the door to switch off the warning signal.
Temperature alarm
The temperature alarm (beeping signal)
switches on if the freezer compartment is
too warm and the frozen food is at risk
of thawing.
Temperature display flashes, Fig. 2/2.
Note
Do not refreeze thawing or thawed food.
Only ready meals (boiled or fried) may
be refrozen.
No longer store the frozen produce for
the max. storage period.
The alarm may switch on without any risk
to the frozen food:
when the appliance is switched on,
■
when large quantities of fresh food are
■
placed in the appliance,
if the freezer compartment door is
■
open too long.
Switching off the alarm
Fig. 2
Press the temperature setting button 4
to switch off the warning signal.