Blaupunkt 5IX90291 Notice D'utilisation page 155

TABEL OVER KOMPETENS FEJL
Disse fejl vises på kogepladens display.
These errors appear on the cooking top display.
Error code
C, E, C flashing, E flashing
or
- symbol
E2
E3
E4, E5, E6, E7, E8, E9, EA,
EC, EH,
No display / Function
u
Er31, Er47, Er22, Er20
or segments on the
display lighting up
cyclically
RENGØRING OG VEDLIGEHOLDELSE PULIZIA E MANUTENZIONE FUNKTION
Description
If the display in one of
the cooking zones shows
one of these symbols, an
intervention has occurred
or is occurring in the
system's basic
configurations.
Excessive temperature on
the cooking zone.
Malfunction due to the
use of inappropriate
cookware materials.
Hardware fault
Voltage or touch control
error.
Pot not detected
Touch control fault
OPERATION
Possible causes
Problems or changes
detected to the system's
basic configurations.
Overheated pot.
Pots of inappropriate
material or
possible loss of magnetic
properties at higher
temperature.
Hardware errors detected
Faulty electrical
connection or faulty
component.
Inappropriate
cooking pot
Touch control error
detected
155 155
I
D K
Solution
Contact the authorised
service centre, specifying
the error code.
Allow the system to
cool down, decreasing
the power or removing
the pot.*
Use pots of a suitable
material or replace them.*
Contact the authorised
service centre, specifying
the error code.
Contact the authorised
service centre, specifying
the error code.
Use a suitable pot. Refer to
the section of the manual
on suitable recipients.*
Contact the authorised
service centre, specifying
the error code.