Publicité
Les langues disponibles
Les langues disponibles
4. SETTING THE FUNCTIONS
READY-TO-OPERATE MODE:
To set the appliance to ready-to-operate mode, put the ON/OFF switch on the back of the
device to 'I'. The appliance now shows the current temperature on the display.
31.
ON/OFF BUTTON
Use the On/Off button to switch the appliance on and off.
As soon as you switch on the appliance, the fan begins to circulate air and the
symbol appears on the display.
When you switch off the appliance, it will continue to operate in
fan mode for approx. 30 seconds until the appliance has
cooled down. The
same time.
32.
FUNKTION BUTTON
Set the heating levels with the function button. You can select between a low and a high
heating level:
•
•
•
33.
Use
Press the
temperature.
•
•
symbol will flash on the display at the
Press one time → Low heating level → appears on the display
Press two times → High heating level → appears on the display
Press three times → Fan function
TEMPERATURE BUTTONS
to set the desired target temperature (10°C–35°C).
button to increase the temperature and the
The
symbol is shown from a temperature setting of 31°C and above
The
symbols are shown from a temperature setting of 33°C and above.
NOTE
157
button to decrease the
Publicité
