7.2 Carburetor adjustment
The carburetor is a vital part of the engine. Adjusting should be left to our
company authorized dealer with the professional knowledge, specialized
date, and equipment to do so properly.
7.3 Engine oil replacement
• Avoid draining the engine oil immediately after stopping the engine.
The oil is hot and should be handled with care to avoid burns.
Avoid draining the engine oil immediately after stopping the engine. The oil
is hot and should be handled with care to avoid burns.
1. Place the generator on a level surface and warm up the engine for sever-
alminutes. Stop the engine by turning the switch to "OFF".
2. Remove the screws and then remove the cover.
3. Remove the oil filler cap .
4. Place an oil pan under the engine. Tilt the generator to drain the oil
completely.
5. Place the generator on a level surface once more.
6. Add engine oil to the upper level.
7. Wipe the cover clean, and wipe up any spilled oil.
8. Install the oil filler cap.
9. Install the cover and tighten the screws.
Recommended engine oil: SAE SJ 15W-40
Recommended engine oil grade: API Service SE type or higher
Engine oil quantity: 0.5L
• Do not tilt the generator when adding engine oil. This could result in
overfilling and damage to the engine.
• Be sure no foreign material enters the crankcase.
28
MAINTENANCE
WARNING
NOTICE
NOTICE