APPENDIX A:
Connection overview
BIJLAGE A:
Overzicht aansluitingen
ANNEXE A :
Vue d'ensemble des connections
ANHANG A:
Übersicht Anschlüsse
LIITE A:
Liitännät
APPENDIX A:
Anslutningsöversikt
EN:
A Load connection. AC out1. Left to right: N (neutral), PE (earth/ground), L (phase)
B Load connection. AC out2. Left to right: N (neutral), PE (earth/ground), L (phase)
C AC input: Left to right: N (neutral), PE (earth/ground), L (phase)
D Alarm contact: (left to right) NO, NC, COM.
E Trickle charge (12 and 24V model only)
F
Primary ground connection M6 (PE).
G M8 battery positive connection.
H M8 battery minus connection.
I
switch: 1=On, 0=Off, ||=charger only
J
Terminal for: top to bottom:
1.
12V 100mA
2.
Programmable contact K1 open collector 70V 100mA
3.
External ground relay +
4.
External ground relay –
5.
Aux input 1 +
6.
Aux input 1 –
7.
Aux input 2 +
8.
Aux input 2 –
9.
Temperature sense +
10. Temperature sense –
11. Battery voltage sense +
12. Battery voltage sense -
K External current sensor
L
2x RJ45 VE-BUS connector for remote control and/or parallel / three-phase operation
M Connector for remote switch: Short to switch "on".