i-tec USB 3.0 METAL CHARGING HUB Mode D'emploi page 7

follow the on-screen instructions. The HUB will be installed
and displayed in Device manager as "Generic USB Hub" and
"Generic USB SuperSpeed Hub".
SYSTEM REQUIREMENTS
Windows XP, Vista, 7 / 8 / 8.1 / 10 32/64bit, macOS X 10.x
or higher
PACKAGE CONTENTS
• i-tec USB 3.0 Metal Charging HUB 7 Port with bulit-in
USB cable (28 cm)
• Power adapter (DC cable 120 cm)
• Quick Start
SAFETY INSTRUCTIONS
• Do not expose to extreme temperatures and air
humidity.
• Use the device on flat surfaces – you will prevent it from
slipping and falling to the ground.
• Save the user manual for a possible use later.
In cooperation with the service department:
• Check functionality after falling to water or to the
ground.
• Check functionality when the cover is broken.
• Send the device back if it does not work in accordance
with the user manual.
External power supply exclusively for use with U3HUB778.
FAQ
available on our website www.i-tec.cz/en/ on the „FAQ" tab
of this product.
Quick Start
| 7
ENGLISH