Publicité
Les langues disponibles
Les langues disponibles
EN
Appendix
This appendix contains links to reference
documents explaining the technologies that
your terminal uses:
Document
Technical features
Configuring your computer
for DHCP
To access your terminal, you will need to use the
DHCP (Dynamic Host Configuration Protocol).
Your terminal will contact a DHCP server, which
automatically assigns an IP address to the
computer connected to the Ethernet port.
To activate DHCP, follow the steps below:
Click
Start
➊
Network and Internet.
Click Network and Sharing Centre under
Advanced network settings part.
To display the network connections,
➋
click the Change adapter settings link
on the left-hand side of the Network and
Sharing Centre panel.
Right-click the connection you wish
➌
to change, then click Properties. Enter
an administrator password or confirm the
change if prompted to do so.
Click Internet Protocol version 4 (TCP/
➍
IPv4) then Properties.
9
Link
NeptuLink_Datasheet_EN.pdf
,
then
Settings
Click Obtain an IP address automatically.
➎
Click
Obtain
➏
automatically.
and
Click OK to close the dialog box. Your
➐
computer is now configured for DHCP.
DNS
Server
address
Publicité
