Publicité
Les langues disponibles
Les langues disponibles
EN
Assembly
Pack contents
The pack contains the following items:
•
5G terminal
•
Mechanical assembly kit
•
Ferrite
•
Installation and usage guide
If any of these items is incorrect, missing or
damaged, please contact your local retailer or
MVG Industries.
4
Reset button
SIM card slot
Ethernet connector
Vent
Description of the terminal
•
For best performance, the system must be
placed vertically (vent at bottom).
•
SIM card access and Ethernet cable
connection use toolless cap.
•
The Ethernet cable should have a diameter
from 5mm to 7mm.
•
Factory Reset can be realized by pressing
the push button between 5 to 10 seconds
continuously.
Avoid any contact of thread lock
or Tef-Gel on the radome of the device.
EMI Suppressor Ferrite must be
installed on Ethernet cable,
at the output of the device.
(1 ferrite No. 74271112 from Würth
Elektronik).
Accessories
A large choice of mounting solutions is
available, please contact your local retailer or
MVG Industries to have the one adapted to
your configuration.
Publicité
