Publicité
Les langues disponibles
Les langues disponibles
EN
Prerequisites
Ensure that you have the following items
ready before installing your terminal:
•
Active Internet access from a telephone
service provider (5G/4G data package).
•
Configuration settings for the SIM card - see
below.
•
Computer configured for DHCP (Dynamic
Host Configuration Protocol, see appendix).
Ensure that you check the network coverage
and compare the available offers from different
service providers.
Stay at least 20cm away from the terminal
when it is switched on.
Required SIM configuration
Depending on how your SIM card(s) are
configured, you will need one or more
configuration settings to connect your
terminal to the Internet:
•
APN setting (Access Point Name).
•
PIN code (Personal Identification Number).
Your telephone service provider should have
given you all the necessary information to
enable you to connect to the Internet. Please
contact your service provider if you cannot find
this information.
It is highly recommended to configure the
terminal before inserting your SIM card.
5
Getting start
It is highly recommended to Configure the
terminal before installing it on its mounting.
Your terminal can be configured in nine steps:
Switch on the terminal
➊
PC using Ethernet cable
➋
Configure the terminal - See below
➌
Switch off the terminal
➍
Insert the SIM card
➎
Switch on the terminal
➏
Check connection to Internet
➐
Switch off the terminal
➑
Install the terminal on its mounting.
➒
Configuring the terminal
Follow the instructions below to configure and
test the 5G/4G connectivity.
Your computer must be configured
for DHCP. For instructions
on DHCP configuration, please refer
to your computer documentation
or see the Appendix
"Configuring your computer for DHCP".
Switch your computer on if it is off
➊
The terminal will automatically assign
an IP address to your computer.
Type
the
URL
➋
http://neptulinkv3.lan into the address field
of a browser such as Safari, Google Chrome
or Mozilla Firefox.
http://192.168.1.1
or
Publicité
