Publicité
Les langues disponibles
Les langues disponibles
Features
continued
A
Configuration and Operation
Remote Monitoring and Control
The PDU provides remote monitoring
outlet control
B
and more via Web browser,
telnet and SNMP-based Network
Management Systems. For more information
about configuration and operation of the
PDU via the PowerAlert Web browser
interface, refer to the SNMPWEBCARD User's
Guide, included on the CD-ROM bundled
with the PDU.
13-11-194-933093.indb 10
PS/2 Port: Use this port to connect a Tripp Lite ENVIROSENSE
environmental sensor to provide remote temperature/humidity
monitoring and a dry contact interface to control and monitor
alarm, security and telecom devices. Visit www.tripplite.com for
ordering information. Note: Do not connect a keyboard or mouse
to this port.
RJ-45 Configuration Port: Use this port to provide a direct
terminal connection to a computer with a terminal emulation
program. An RJ-45 cable is included with the PDU. If you need a
replacement cable, visit www.tripplite.com for ordering
information.
Ethernet Port: Use this RJ-45 jack to connect the PDU to the
network with a standard Ethernet patch cable. The Link LED
B
and Status LED
shown in the table below. This port is not compatible with PoE
B
(Power Over Ethernet) applications.
Link LED Color
A
Off
Flashing Amber
Flashing Green
Status LED Color
B
Off
Steady Green
Flashing Amber
A
,
10
indicate several operating conditions, as
Network Operating Conditions
No Network Connection
100 Mbps Network Connection
10 Mbps Network Connection
Card Not Initialized
Card Initialized and Operational
Error - Card Not Initialized
A
B
A
12/5/2013 5:22:06 PM
Publicité
