Publicité
Les langues disponibles
Les langues disponibles
PlayBaCK VIa BlUeTooTH® enaBleD DeVICes
InITIal DeVICe PaIrInG anD ConneCTIon
In order to pair and connect your Bluetooth® device for the first time:
1. Press the soUrCe button to Bluetooth® mode and "
light glows blue and flashes which means the unit is in Bluetooth® mode and ready to pair.
2. Turn on the Bluetooth® device you wish to pair and connect.
3. Press and hold the PaIr button on the remote control for 3 seconds. The Bluetooth® indicator light will start
flashing rapidly which means it is pairing.
4. On your Bluetooth® enabled device, search for the "rs3697Bl" in the list of discovered devices and select it.
It may take the unit and Bluetooth® enabled device a few seconds to pair.
5. When the Bluetooth® indicator glows a solid blue, the unit and the Bluetooth® enabled device are now paired
and connected.
6. You can now enjoy audio from the unit.
notes : If your Bluetooth device (e.g. Smart phone etc.) needs the PIN code while pairing, please enter 4-digit
number: 0000.
The unit can only be connected to one Bluetooth® device at a time.
reConneCTInG a BlUeTooTH® enaBleD DeVICe
Bluetooth® enabled devices must be reconnected when the device has been turned off or the unit has been
turned off.
1. Turn on the Bluetooth® device that has already been paired with the unit.
2. Press the soUrCe button to Bluetooth® mode and "
The Bluetooth® indicator light glows blue and starts flashing rapidly, and it auto searches for the last paired
Bluetooth® device in memory.
3. Depending on your Bluetooth® device, your device may automatically connect to the unit.
If the device does not automatically connect to the unit, press and hold the PaIr button on the remote control
for 3 seconds until the Bluetooth® indicator light starts flashing rapidly, then search for the "rs3697Bl" in its
list of your Bluetooth® devices and select it.
4. Once the Bluetooth® indicator turns a solid blue, the Bluetooth® enabled device is paired and connected.
5. You can now enjoy audio from the unit.
PaIr anD ConneCT WITH anoTHer neW DeVICe
In order to pair the unit to a new device, you must first disconnect the currently paired and connected Bluetooth®
device from the unit.
1. On the currently paired and connected Bluetooth® device, select the "rs3697Bl" from the list of currently
paired and connected devices, and disconnect it. Please refer to your Bluetooth® enabled device User's Guide
for direction on how to disconnect a device.
Or turn off the Bluetooth® device.
2. Follow the Initial device pairing and connection instructions above.
1. Press the oPen/Close button to open the CD door. Place a disc in the center with the label side up and then
press the oPen/Close button to close the CD door.
2. Press the soUrCe button to CD mode. "
is shown on the display.
Play/PaUse button to start playing.
3. Press the
repeat Current Track
/MeM.UP button until "
Press the
repeat the entire CD
Press the
/MeM.UP button until "
Cancel Playback Mode
/MeM.UP button until "
Press the
RS3697BL_IB_R.indd 5
" is shown on the display. The Bluetooth® indicator
" is shown on the display.
CD PlayBaCK
" appears and "- -" blinks on the display. Then the total track no.
rePeaT PlayBaCK
" blinks on the display. The current track will be played repeatedly.
" stops blinking and remains on. All tracks will be played repeatedly.
" disappears.
EN - 5
EN
EN
2014/5/26 12:03:13
Publicité
