Publicité
Les langues disponibles
Les langues disponibles
* see MarKInG on rear oF ProDUCT *
WarnInG:
• TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE
UNIT TO RAIN OR MOISTURE.
• TO AVOID ELECTRICAL SHOCK, DO NOT OPEN THE CABINET.
REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
• THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR
SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUID,
SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
FCC sTaTeMenTs
EN
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) This device must
accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
WarnInG: Changes or modifications not expressly
approved by the party responsible for compliance could void
the user's authority to operate the equipment.
For Customers in Canada
This device complies with Industry Canada License-exempt
RSS-210. Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device
must accept any interference, including interference that
may cause undesired operation of the device.
This apparatus complies with the Class B limits for radio noise
emission set out in radio interference regulations.
FCC rF radiation exposure statement
Caution: To maintain compliance with the FCC's RF exposure
guidelines, place the CD Audio System at least 20cm from
nearby persons.
CAN ICES-3 (B) / NMB-3 (B)
Warnings:
• The AC power plug is used as disconnect device and it
should remain readily operable during intended used.
In order to disconnect the apparatus from the mains
completely, the AC power plug should be disconnected
from the mains socket outlet completely.
• The mains plug of apparatus should not be obstructed OR
should be easily accessed during intended use.
• Minimum 10 cm (4 inches) distances around the apparatus
for sufficient ventilations.
• The ventilation should not be impeded by covering the
RS3697BL_IB_R.indd 2
saFeTy PreCaUTIons
the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
ventilation openings with items such as newspaper, table-
cloths, curtains, etc.
• No naked flame sources such as lighted candles should be
placed on the apparatus.
On Safety
As the laser beam used in this compact disc player could
be harmful to the eyes, do not attempt to disassemble the
casing. Refer servicing to qualified personnel only.
• Do not put any foreign objects in the disc compartment.
If you do so, the laser beam interlock may be defeated
allowing the laser to remain on when the lid is opened.
• Should any objects or liquids fall into the unit, disconnect
the power supply and have the unit checked by qualified
personnel before any further operation.
On Operation
Since the CD system offers a wide dynamic range, the peaks
of the high level inputs are recorded with high fidelity, and
the noise level is very low. Do not turn up the volume while
listening to a part of the disc with no audio signals or very
low level inputs. If you do so, the speakers may be damaged
when the peak level of the sound is played. The lens of the
laser should be kept clean. Do not touch the lens. If you do
so, the lens may be damaged and the unit will not operate
correctly.
On Use
Never use the unit where it would be subject to:
- Heat sources such as radiators or air ducts.
- Direct sunlight.
- Excessive dust.
- Moisture or rain.
- Mechanical vibration or shock.
- Uneven surface.
• Do not place any heavy objects on top of the unit.
• When the unit is used with an AC power plug, do not wrap
the unit in a cloth, blanket, etc. If you do so, the temperature
inside and outside the unit may rise considerably, resulting
in malfunctioning of the unit.
• If the unit is brought directly from a cold to a warm
location, or is placed in a very damp room, the moisture
may condense on the lens inside the unit. Should this occur,
the unit will not operate. In this case, remove the disc and
leave the unit in a warm place for several hours until the
moisture evaporates.
• For the unit to operate at its best, it should not be subject to
temperatures below 41°F (5°C) or above 95°F (35°C).
Additional safety information
• Apparatus shall not be exposed to dripping or splashing
and no objects filled with liquids, such as vases, shall be
placed on the apparatus.
• Always leave sufficient space around the product for
ventilation. Do not place product in or on a bed, rug, in a
bookcase or cabinet that may prevent air flow through vent
openings.
• Do not place lighted candles, cigarettes, cigars, etc. on the
product.
• Connect power plug only to AC power source as marked on
the product.
• Care should be taken so that objects do not fall into the product.
• Do not attempt to disassemble the cabinet. This product
does not contain customer serviceable components.
EN - 2
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
2014/5/26 12:03:13
Publicité
