Publicité
Les langues disponibles
Les langues disponibles
Using Smart Control (Lower oven only)
To use the oven's Smart Control, you must download the SmartThings app to a
mobile device. Functions that can be operated using the SmartThings app may not
work smoothly if communication conditions are poor or the oven is installed in a
place with a weak Wi-Fi signal.
Please refer to the following table for the main functions that can be operated
from the app.
When Smart Control on the
Monitoring (Oven), Oven off
oven is off
When Smart Control on the
Monitoring (Oven), Oven start, Oven off, Error
oven is on.
check
How to connect the oven
Download and open the SmartThings app on your smart device.
1.
2.
Follow the app's on-screen instructions to connect your oven.
3.
Once the process is complete, the connected
displays and the app will confirm you are connected.
4.
If the connection icon does not turn on, follow the instruction in the app to
reconnect.
NQ70R5510DG_AA_DG68-01148A-02_EN.indd 41
To start the oven remotely
Touch Smart Control.
controlled remotely by a connected mobile device.
When Smart Control is on you can:
•
•
•
•
•
•
•
icon located on your oven
•
•
appears in the display. The oven can now be started and
Remotely change oven settings (mode, time, temperature) using your mobile
device.
Remotely start the oven.
Remotely turn off the oven.
Once cooking starts, you can change the cooking time and temperature
remotely.
NOTE
Important: Self clean mode cannot be started remotely.
Opening the oven door or touching Smart Control will delete
display and prevent you from turning the oven on or controlling the oven
remotely.
If
is not shown in the display, you can still monitor the oven's status and
turn the oven off.
When oven cooking is finished or cancelled,
If you use a microwave oven, you may not be able to use the Smart Control
app due to Wi-Fi signal interference.
from the
will turn off.
English 41
11/11/2019 5:51:11 PM
Publicité
